Liquid Granite | Technical data
Technical Data — Typical values at 25°C
> 0N/mm²
Compressive strength
0N/mm²
Flexural strength
0N/mm²
Tensile strength
< 0mg
Abrasion loss
| Property | Value |
|---|---|
| System | Two-component (Part A + Part B) |
| Appearance | Fine colored granular finish |
| Solid content by weight | 100% |
| Density | 1.85 ± 0.05 kg/L |
| Pot life | 30–45 min (decreases at higher temperatures) |
| Initial setting | approx. 8 hours |
| Final setting | approx. 24 hours |
| Full hardness | 7 days |
| Min. application temperature | 10°C |
| Theoretical consumption | approx. 1.9–2.0 kg/m²/mm |
| Coverage per 20 kg set | approx. 10 m² at the specified thickness |
| Adhesion to concrete | 2.18 N/mm² (concrete failure) |
| Abrasion resistance | < 54 mg loss |
| Compressive strength | > 80 N/mm² |
| Flexural strength | 45 N/mm² |
| Tensile strength | 20 N/mm² |
| Shelf life | 24 months in sealed original packaging |
Chemical resistance
- Hydrochloric acid 10% / 20%No effect
- Sulfuric acid 10% / 20%No effect
- Acetic acid 10%No effect
- Sodium hydroxide 50%No effect
- Potassium hydroxide 50%No effect
- Sodium chloride 50%No effect
Storage
- Store in original, unopened containers.
- Keep in a cool, dry place away from direct sunlight and heat.
- Shelf life: 24 months.
Cleaning
- Clean tools immediately after use with white spirit.
- Hardened material can only be removed mechanically.
Health & Safety
- Refer to the Safety Data Sheet before use.
- Wear gloves, safety glasses and suitable protective clothing.
- Keep out of reach of children.
Values represent typical laboratory values. Actual results may vary with substrate condition, temperature, humidity and application method.
Specification clause for consultants
Ready-to-paste text for the bill of quantities and project specifications.
Supply and apply WERKON Liquid Granite seamless decorative mineral flooring system, two-component (Part A + Part B), solvent-free, on a properly prepared concrete substrate. Work includes mechanical grinding and dust removal of the substrate, application of WERKON Primer, and application of WERKON Liquid Granite at 1.0–1.5 mm thickness (theoretical consumption 1.9 kg/m² per mm), spread with a steel trowel and de-aired with a spiked roller. Density 1.85 ± 0.05 kg/L; adhesion to concrete ≥ 2.18 N/mm² (concrete failure); compressive strength > 80 N/mm²; full hardness after 7 days at 20 °C. Color: [GR code] from the WERKON Liquid Granite range. Installation by a WERKON-approved applicator. Measured per m² of finished surface.